Epson Disc Producer PP-100NII User Manual page 176

Hide thumbs Also See for Disc Producer PP-100NII:
Table of Contents

Advertisement

Error Message
Non-standard ink
Continue?
Print tray
open/close error
Printer maint.
error
Replace ink
(C,LC,LM,M,Y,K)
Replace inkpad
Stacker 3
installed
Stacker 3
not installed
Remedy
To use the ink cartridge, press the
change to a Epson brand ink cartridge, press the CANCEL
button (No), and change the ink cartridge.
Use of non-Epson brand ink cartridges is not recommended.
• Use of non-Epson brand ink cartridges can result in problems
that will not be covered by the warranty.
• Epson cannot guarantee the quality and reliability of non-
Epson brand products. Repairs for any damage or breakdown
of this product due to the use of non-Epson brand products
will not be free of charge even if the warranty period is still
valid.
• This product performs color adjustment based on use of
Epson brand ink cartridges. Use of non-Epson brand ink
products can adversely affect the printing quality and prevent
the product from realizing its maximum performance.
See "Changing the ink cartridge" on page 151 in this guide for
the ink cartridge changing procedure.
-When the printer tray does not come out-
See "Printer Tray Does Not Come Out" in the PP-100NII
Administrator's Guide.
-When the printer tray does not close-
Remove any remaining discs, turn off the power, and then
turn on the power again.
If the same error message still appears, repair is required. Please
contact Customer Support.
Repair is required.
Please contact Customer Support.
The ink in the cartridge is out.
Replace the cartridge of the displayed color. (See "Changing
the ink cartridge" on page 151 in this guide.)
It is time to replace the ink pad.
Please contact Customer Support. The ink pad cannot be
replaced by the customer.
Remove Stacker 3, and close the disc cover. Stacker 3 is not
used in Standard Mode or External Output Mode (when Stacker
4 is set as the output stacker).
Load Stacker 3, and close the disc cover. Stacker 3 is used in
Batch Mode or External Output Mode (when Stacker 3 is set as
the output stacker).
Troubleshooting
Notification
button (Yes). To
Sound
176

Advertisement

Table of Contents
loading

Table of Contents