Epson Disc Producer PP-100NII User Manual page 175

Error Message
Internal
autoloader error
Internal drive
error (DR1/2)
Internal printer
error
Invalid
state error
No disc
ST1,ST2
No ink cartridge
(C,LC,LM,M,Y,K)
No stacker
ST1,ST2,ST3
Remedy
Perform the procedure below.
1. Turn off the power.
2. Open the disc cover, and check if any dust or foreign
objects are inside.
3. Turn on the power.
If the same error message still appears, repair is required. Please
contact Customer Support.
Turn off the power, and then turn it on again. If the same
error message still appears, repair is required. Please contact
Customer Support.
Turn off the power, and then turn it on again. If the same
error message still appears, repair is required. Please contact
Customer Support.
Turn off the power, and then turn it on again. If the same
error message still appears, repair is required. Please contact
Customer Support.
Load discs into the input stacker (Stacker 1 or Stacker 2).
The ink cartridge of the displayed color is not installed, or is not
installed correctly.
Correctly install the cartridge of the displayed color.
(See "Changing the ink cartridge" on page 151 in this guide.)
Load the displayed stacker, and close the disc cover. (See
"Handling stackers" on page 21 in this guide.)
Troubleshooting
Notification
Sound
175