Epson Disc Producer PP-100NII User Manual page 184

Symptom/Problem Status
Head cleaning does not work.
The printing speed slowed
down during continuous
printing.
Cannot publish discs.
Check/Remedy Procedure
Has an error occurred in the product?
If an error has occurred, clear the error.
Is there enough ink?
Head cleaning cannot be performed unless there is enough ink. Replace
with a new ink cartridge.
See "Changing the ink cartridge" on page 151 in this guide for the ink
cartridge changing procedure.
When printing is performed for an extended period of time, disc transfer
and printing may be stopped temporarily. This is for slowing the printing
speed to prevent overheating and damage to the product.
Although printing can be continued when this occurs, it is recommended
that you stop product operation and leave it with the power on for about
30 minutes. (The product will recover after about 3 hours with the power
off.)
See "When discs cannot be published" on page 187 in this guide.
Troubleshooting
184