Epson Disc Producer PP-100NII User Manual page 86

Enter the settings for [Name of Custom Label Size], [Inside diameter], and [Outside
3
diameter], and click [Save].
Setting Item
Name of Custom Enter the name of the user defined label size (number of characters: up to 24
Label Size characters).
If characters that are 4 bytes are used, the number of characters you can use
becomes less than the above.
Inside Diameter Set the inside diameter of the label. You can set a value within the range of 180 to
500 (18.0 to 50.0 mm).
Outside Diameter Set the outside diameter of the label. You can set a value within the range of 700 to
1,194 (70.0 to 119.4 mm).
Mask Rib Area Select this to mask the rib area.
Rib refers to the protruding section of the disc inside circumference.
Masking the rib area enables you to prevent ink running onto the rib when a printed
disc and rib touch in the output stacker.
Rib Inside Diameter Set the inside diameter of the rib area. You can set a value within the range of 270 to
500 (27.0 to 50.0 mm).
Rib Width Set the width of the rib area. You can set a value within the range of 1 to 115 (0.1 to
11.5 mm).
Printing inside the rib area may result in ink getting on discs, discs sticking together, or
discoloration.
Description
Publishing Discs
86