Name and Function of Each Part
10
Auto Mode Operation
19
Touch AUTO to change to the Auto Mode screen.
20
Make sure that READY is displayed, and start irradiation.
Irradiation can be started via an external signal or the START
button on the main unit. The START button on the main unit
initiates batch irradiation.
21
During irradiation, the START button on the main unit is
illuminated, and the LED's external BUSY signal is on
(initial Busy signal setting: A CONTACT).
The Busy signal can be switched to B CONTACT.
22
When irradiation completes, the LED's external BUSY
signal is off.