Specifications - Panasonic ANUJ5010 User Manual

13 Specifications

Controller Model
Operating power
Head Irradiation intensity
*1
Model
Irradiation
wavelength
Estimated lamp life
*2
Controller Connectable heads
Functions
Output fine tuning
LED irradiation
Patterns
Light modulation
Irradiation control
Setting/operation
External input
External output
Operating
temperature/
Humidity range
Storage temp./
Humidity range
*1 At light modulation of 100%, room temperature of 25
guaranteed value.
*2 Lamp life of 10,000 hours is an estimate based on using a standard head installation with an initial intensity of
70%.
36
ANUJ5010
100 to 240 V AC (±10%)
50/60 Hz 70 VA (at 100 V 100% output)
1,400 mW/cm
With lens ANUJ61324C
cable
With lens ANUJ61324
Head alone ANUJ6130
365 nm ±5nm Class-3B LED system
10,000 hours
Max. 4 heads (joint and independent control of each head)
±15 steps per head
(at 100% output, approx. –5% to +10%)
Note: Can be used to calibrate head deviation.
Programmable pattern irradiation (10 steps in 10 patterns);
batch/individual control for each head
Stores 10 irradiation patterns, switchable via external signals.
Digital light modulation (0% to 120%; increments of 1%)
Manual or timer control (0.1 to 999.9 sec.)
Setting (English/Japanese/Chinese/Korean switching) with
interactive 2-color LCD touch switch.
Power key switch
Separate irradiation input/separate irradiation stop input,
interlock, complete irradiation input, and type switching.
Ready signal, error signals, warning output, busy output (for
each head)
Controller: 0 to 40
Head: 5 to 35
Controller: –10 to 60
Head: –10 to 60
2
1,000 mW/cm
ANUJ61325C
ANUJ61325
o
C, 85% or less (no condensation)
o
C, 85% or less (no condensation)
o
C, 85% or less (no condensation)
o
C, 85% or less (no condensation)
o
C, and with cooling device attached. This is not a
2