Operation Via External Signals; How The External Control Connector And Signals; Work - Panasonic ANUJ5010 User Manual

10 Operation via External Signals

10.1 How the External Control Connector and Signals Work
Pin layout of the external control connector (two banks of 12 pins)
Signal Name
1 READY
2 BUSY1
3 ERROR
4 WARNING
5 COM
6 +24V
7 BUSY2
8 BUSY3
9 BUSY4
10 COM
11 START1
12 STOP1
13 START2
14 STOP2
15 START3
16 STOP3
17 START4
18 STOP4
19 Type Chg (1)
20 Type Chg (2)
21 Type Chg (3)
22 Type Chg (4)
23 COM
24 Emergency Stop
Warning
Set the input signal pulse on for at least 0.3 seconds.
26
I/O
Output Irradiation prep. status OK
Output LED 1 irradiation ongoing
Output Error signal
Output Warning signal
Output GND
Output 24 V DC output
Output LED 2 irradiation ongoing
Output LED 3 irradiation ongoing
Output LED 4 irradiation ongoing
Input GND
Input Start LED 1 or batch irradiation signal
Input Stop LED 1 or batch irradiation signal
Input Start LED 2 irradiation signal
Input Stop LED 2 irradiation signal
Input Start LED 3 irradiation signal
Input Stop LED 3 irradiation signal
Input Start LED 4 irradiation signal
Input Stop LED 4 irradiation signal
Input Type change 1 signal (lower)
Input Type change 2 signal
Input Type change 3 signal
Input Type change 4 signal (upper)
Input GND
Input Emergency Stop
Description