Manual Irradiation - Panasonic ANUJ5010 User Manual

■ Manual Irradiation

Manually start and stop irradiation. The light modulation ratio and
irradiation time can be changed at will. Configure them before
irradiation.
When performing manual irradiation, all selected LEDs
Warning
(those with inverted displays) perform batch irradiation.
Individual irradiation is not available.
Starting Irradiation
1
Touch MENU → MANUAL. The Manual Mode screen
appears.
2
Make sure that READY is displayed.
3
Touch the numbers of the LEDs to perform irradiation (１
to ４), inverting their displays (uninverted LED numbers
cannot be selected).
4
On the main unit, press the START button.
Irradiation starts, and the START button lights. The light
modulation ratio can be changed during irradiation. (See
previous page)
Ending Irradiation
On the main unit, press the START button.
Irradiation stops, and the START button light turns off.
Operation Modes
19