Setting Models - Panasonic ANUJ5010 User Manual

■ Setting Models

1
Touch the number of the operation type to configure.
Touch the down arrow (↓) to display numbers 7 through
10.
2
Touch TYPE SET to display the selected model screen.
Touch the up and down arrows (↑/↓) to display the
previous/next models in turn.
Touch PATTERN to configure the irradiation patterns. See
9.2 Configuring the Irradiation Patterns for details.
3
Touch the LED pattern number of the irradiation pattern to
select.
The Numeric Input screen appears.
Enter the numbers 1 to 10, then touch the Enter key ( ↵ ) to
4
modify the irradiation pattern. If 0 is entered, the LED will
not irradiate.
5
Repeat steps 3 and 4 to select the irradiation patterns for
LEDs 1 to 4, then touch BK.
Changing/Setting Models
21