Table of Contents
Advertisement
[9] FLASH ROM VERSION UP
PROCEDURE
(Necessary items for version-up)
A Personal computer
B RS232C cross cable (D-sub 9pin to D-sub 9pin, or D-sub 25pin to
D-sub 9pin)
C Software for version-up
(ROM type)
The flash ROM is directly installed to each PWB.
(Target PWB)
1 MCU PWB
2 FAX PWB
Outline of Version-up Procedure
C
Download
data
RS232C connector
(9pin or 25pin)
B
RS232C cross cable
(D-sub 9pin to D-sub 9pin)
or
(D-sub 25pin to D-sub 9pin)
I/F circuit (9pin)
1
MCU-PWB
FAX-PWB
(AR-M236/M276)
Prepare following files necessary for program download
• Maintenance software: maintenance.exe
• Andromeda module file: ProcModelC.mdl (for AR-M236/M276
series)
1. Program download method (for Copier,
and fax program)
Following operational procedures are for:
• Copier program
• fax program
1)
Make sure copier is off, and connect it to PC with download cable
beforehand.
2)
Start up the maintenance program on PC. Select model name
"AR-M236/M276/M237/M277 Series" from the model selection
dialogue box.
(PC)
A
Centro connector
2
AR-FX7 FLASH ROM VERSION UP PROCEDURE 9 - 1
3)
Make sure only "Printer Control Board" tree is visible under "Simu-
lation Command List".
4)
Turn on the copier. The machine starts up in the download mode.
5)
Additional tree will be visible when downloading maintenance pro-
gram on PC.
∗
Make sure to start up maintenance program before turn on the
machine.
Ready to start download process
when these trees appear.
6)
When downloading copier program, expand "Special(Copier)",
and double-click on "All Data areas Download".
When downloading Fax program, Expand "FAX" and double click
on "Program Data Area Download".
Advertisement
Table of Contents
