Table of Contents
Advertisement
Item
25 2.4 V27t
26 0.3 FLG
7EH Flag signal
27 CED2100
Tone signal
28 CNG1100
29 0.3 V21
30 ANSam
31 RINGER
Pseudo-ringer sound
([ON HOOK] key ON)
32 No MSG
Voice message (no sound)
Under the state where the ring back
tone can be sent to the line, keep the
sound composition IC volume to 0.
33 No RBT
Ring back tone (no sound)
Under the state where the ring back
tone can be sent to the line, keep the
G/A volume to 0.
34 DP MAKE
Dial pulse (make)
Maintain the make state with keeping
the condition to be able to send to the
dial pulse line.
35 DP BRK
Dial pulse (break)
Maintain the break state with keeping
the condition to be able to send to the
dial pulse line.
Note: Executable only when the FAX is installed.
66-5
Purpose
Operation test/check
Function
Signal send mode (Signal send level soft SW setting)
(Purpose)
Section
FAX
Item
Operation
Operation/procedure
Select the signal number with the 10-key, and press the [START] key.
By setting the signal number, signals are sent to the line and the
machine speaker. (Sending signals is continued until interruption com-
mand is made (by pressing [CUSTOM SETTINGS] key.)
By entering the signal number and pressing the [START] key during
execution, the signal kind can be changed.
Signal number
1 NO SIGNAL Signal not sent
2 33.6 V34
33.6 V34
3 31.2 V34
31.2 V34
4 28.8 V34
28.8 V34
5 26.4 V34
26.4 V34
6 24.0 V34
24.0 V34
7 16.0 V34
16.0 V34
8 19.2 V34
19.2 V34
9 16.8 V34
16.8 V34
10 14.4 V34
14.4 V34
11 12.0 V34
12.0 V34
Send level
Send signal
Selection
menu
–
Yes
Yes
None
None
None
1: 0dB
2: Soft SW
1: 0dB
2: Soft SW
1
Send level
Send signal
Selection
menu
None
AR-FX7 SIMULATION 6 - 7
Signal number
–
12 9.6 V34
13 7.2 V34
14 4.8 V34
15 2.4 V34
16 14.4 V33
17 12.0 V33
18 14.4 V17
19 12.0 V17
20 9.6 V17
21 7.2 V17
22 9.6 V29
23 7.2 V29
24 4.8 V27t
25 2.4 V27t
26 0.3 FLG
27 CED2100
28 CNG1100
29 0.3 V21
30 ANSam
31 RINGER
32 No MSG
33 No RBT
34 DP MAKE
35 DP BRK
Note: Executable only when the FAX is installed.
66-6
Purpose
Function (Purpose) Printing the confidential password
Section
Item
–
Operation/procedure
–
Press the [START] key.
–
The confidential ID table (confidential BOX numbers, confidential BOX
–
names, and confidential password) is printed.
–
The confidential data of My company mode is printed separately.
–
Note: Executable only when the FAX is installed.
–
–
–
–
Send signal
9.6 V34
7.2 V34
4.8 V34
2.4 V34
14.4 V33
12.0 V33
14.4 V17
12.0 V17
9.6 V17
7.2 V17
9.6 V29
7.2 V29
4.8 V27t
2.4 V27t
7EH Flag signal
Tone signal
Pseudo-ringer sound
([ON HOOK] key ON)
Voice message (no sound)
Under the state where the ring back
tone can be sent to the line, keep the
sound composition IC volume to 0.
Ring back tone (no sound)
Under the state where the ring back
tone can be sent to the line, keep the
G/A volume to 0.
Dial pulse (make)
Maintain the make state with keeping
the condition to be able to send to the
dial pulse line.
Dial pulse (break)
Maintain the break state with keeping
the condition to be able to send to the
dial pulse line.
Data output, check
FAX
Data
Confidential/Pass code
Send level
Selection
menu
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Yes
Yes
None
None
None
1: 0dB
2: Soft SW
1: 0dB
2: Soft SW
1
Advertisement
Table of Contents
