Sharp AR-FX7 Service Manual page 23

66-7
Purpose Data output, check
Function (Purpose) Print the screen memory contents
Section FAX
Item Data
Operation/procedure
Press the [START] key.
Used to input all image data (including confidential reception data,
remote send image, not-sent image) stored in image memory of the
FAX section.
The output image is remained even after outputting.
Note: Executable only when the FAX is installed.
66-8
Purpose Operation test/check
Function (Purpose) Voice Message send (Signal send level:
Max.) (Japan only)
Section FAX
Item Operation
Operation/procedure
Select the message number with the 10-key, and press the [START]
key.
By setting the message No., the sound message is sent to the line and
the speaker of the body. (The message is repeated until the interrup-
tion command is provided by pressing the [CUSTOM SETTINGS] key.)
By pressing the [START] key during execution, the signal kind can be
changed.
Item
1 NONE Silent
2 FAX/TEL MSG1 "Hold the line a minute, please send fax."
(TEL/FAX voice response)
3 FAX/TEL MSG2 "Hold the line a minute."
(TEL/FAX voice response)
4 FAX/TEL MSG3 "Not around here, please send fax."
(TEL/FAX voice response)
5 CHANGED RX MSG "Ding Dong"
(Sound delivered when switching to remote
reception)
6 RINGER Call sound
7 EXT.TEL RINGER External telephone call
Message No. 5 can be heard by an external telephone speaker.
Note: Executable only when the FAX is installed.
Image data
1
Voice message
2
AR-FX7 SIMULATION 6 - 8
66-9
Purpose Operation test/check
Function Used to send the voice message. (Signal send level:
(Purpose) Set by soft SW.) (Japan only)
Section FAX
Item Operation
Operation/procedure
Select the message number with the 10-key, and press the [START]
key.
By setting the message No., the sound message is sent to the line and
the speaker of the body. (The message is repeated until the interrup-
tion command is provided by pressing the [CUSTOM SETTINGS] key.)
By pressing the [START] key during execution, the signal kind can be
changed.
Item
1 NONE Silent
2 FAX/TEL MSG1 "Hold the line a minute, please send fax."
(TEL/FAX voice response)
3 FAX/TEL MSG2 "Hold the line a minute."
(TEL/FAX voice response)
4 FAX/TEL MSG3 "Not around here, please send fax."
(TEL/FAX voice response)
5 CHANGED RX MSG "Ding Dong"
(Sound delivered when switching to remote
reception)
6 RINGER Call sound
7 EXT.TEL RINGER External telephone call
Message No. 5 can be heard by an external telephone speaker.
Note: Executable only when the FAX is installed.
66-10
Purpose Adjustment/Setting/Check
Function (Purpose) Image data memory clear
Section FAX
Item Data
Operation/procedure
Select "1: YES" with the 10-key and press the [START] key. (When "2:
NO" is selected, the simulation is canceled.)
Used to clear all image data (including confidential reception data)
stored in image memory of the FAX section.
The management table is also cleared (initialized) at the same time.
* lIf there is any print data, the power must be turned off after clearing.
Note: Executable only when the FAX is installed.
Voice message
2
Image data
1