Table of Contents
Advertisement
3) Touch the [FAX REPORT] key.
PRINTER TEST PAGE
FAX REPORT
SENDING ADDRESS LIST
4) Touch the key of the report that you wish to print.
"PRINT JOB IN MEMORY.PLEASE WAIT UNTIL PRINT OUT."
appears and printing begins.
ACTIVITY
REPORT PRINT
PASSCODE LIST
• The report is printed before other print jobs are printed.
Your machine keeps a record of the most recent 50 transactions (both
transmissions and receptions) that were performed. The record
includes the date of the transaction, the other party's name, the dura-
tion, and result. You can have the report automatically printed when
the number of transactions exceeds 50, or at a specified time. This
allows you to check the machine's activity at regular intervals.
The machine is initially set (factory setting) to never print the report. If
you wish to print the report every 50 transactions or have it printed at a
specified time, change the setting in the key operator programs.
2. Power switch
Keep the machine's power switch turned on at all times.
Faxes cannot be received if the power is turned off.
ON
MEM.POLLING
TIMER LIST
LIST
CONFIDENTIAL
RECEPTION LIST
AR-FX7 KEY OPERATOR PROGRAM 8 - 3
3. Originals
A. Original sizes
Minimum original size
Using the
8-1/2" (width) x 5-1/2"
RSPF
(length)
[210 mm (width) x 148 mm
(length)]
5-1/2" (width) x 8-1/2"
(length)
[148 mm (width) x 210 mm
(length)]
Using the
document
glass
NOTE:
• Originals that are not a standard size (5-1/2" x 8-1/2", 5-1/2" x 8-1/
2"R, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17") can also be
faxed.
• Because the amount of memory is limited, the scannable length of a
long original will vary depending on the resolution setting and the
width of the original. If the memory fills up before the entire original
can be scanned, use a lower resolution setting or shorten the origi-
nal.
• There are restrictions on originals that can be scanned using the
RSPF.
*Long originals
Depending on the resolution setting and the width of the original, there
may not be sufficient space in memory to hold a long original. In this
case, refer to the following table and select a lower resolution setting
and/or shorten the original.
11" wide
Standard
39.3" [1000 mm]
Fine
39.3" [1000 mm]
Super fine
39.3" [1000 mm]
Ultra fine
34.6" [880 mm]
B. Scanning area of original
Note that the edges of an original cannot be scanned.
Area that cannot be scanned:
• 0.2" [5 mm] or less at top edge and 0.2" [5 mm] or less at bottom
edge
• Near edge + far edge = 0.24" [6 mm]
Far edge
Top edge
Area that cannot
Near edge
be scanned
Maximum original size
11" (width) x 39.3"*
(length)
[297 mm (width) x 1000
mm (length)]
∗
Long originals can be
loaded.
When the scanning
resolution is Ultra fine,
the maximum length
is 34.6" [880 mm].
11" (width) x 17"
(length)
[297 mm (width) x 420
mm (length)]
8-1/2" wide
39.3" [1000 mm]
39.3" [1000 mm]
39.3" [1000 mm]
39.3" [1000 mm]
Bottom edge
Advertisement
Table of Contents
