Table of Contents
Advertisement
7. DISPLAY AND OPERATION
7.2 Status display
The servo status during operation is shown on the 4-digit, 7-segment LED display. Press the "UP or
"DOWN" button to change display data as desired. When the required data is selected, the corresponding
symbol appears. Press the "SET" button to display its data.
The servo amplifier display shows the lower four digits of seven data items such as the servo motor speed.
In addition, use of the optional external digital display (MR-DP60) allows the statuses of 15 items to be
shown in up to six digits. For the usage and parameter setting method, refer to Section 5.2.2.
The following table lists display examples:
Item
Servo motor
speed
Load inertia
moment
ABS counter
Downloaded from
ManualsNet.com
Status
Forward rotation at 2500r/min
Reverse rotation at 3000r/min
15.5 times
11252pulse
12566pulse
search engine
Displayed Data
Servo amplifier display
Lit
Reverse rotation is indicated
by the lit decimal points in
the upper three dights.
Value of
0.1 times is shown.
Lit
Negative value is indicated
by the lit decimal points in
the upper three dights.
7 - 2
MR-DP60
Advertisement
Table of Contents
