Mitsubishi Electric MELSERVO-J2 Series Instruction Manual page 180

8. COMMUNICATION FUNCTIONS
0 0
(3) Current alarm clear
As by the entry of the RES, reset the servo amplifier alarm to make the servo amplifier ready to
operate. After removing the cause of the alarm, reset the alarm with no command entered.
Transmission
Command
[8][2]
Downloaded from ManualsNet.com
Data 32 bits long (represented in hexadecimal)
(Data conversion into display type is required)
Display type
0: Conversion into decimal required
1: Used unchanged in hexadecimal
Decimal point position
0: No decimal point
1: Lower first digit (usually not used)
2: Lower second digit
3: Lower third digit
4: Lower fourth digit
5: Lower fifth digit
6: Lower sixth digit
Data No. Data
[0][0] 1EA5
search engine
8 - 25