Code 39 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Code 39 Set Length 1

This feature specifies one of the bar code lengths for
on page
page 116
Length includes the bar code's data characters only.
The length can be set from 0 to 50 characters. See
for more detailed programming instructions.
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
116. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CC3L1
02 = Length 1 is 2 Characters
DEFAULT
Enter/Exit Programming Mode
Code 39 Length Control
Variable Length on
Fixed Length on page 116
"Set Length 1" on page 257
~
CANCEL
Mode.
117