I 2 Of 5 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

I 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
page
the first fixed length if in Fixed Length Mode. The length includes the bar
code's check and data characters.
The length can be set from 2 to 50 characters in increments of two. See
Length 1"
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
140
139. Length 1 is the minimum label length if in Variable Length Mode, or
on page 257 for more detailed programming instructions.
$CI2L1
06 = Length 1 is 6 Characters
DEFAULT
Interleaved 2 of 5 (I 2 of 5)
I 2 of 5 Length Control on
"Set
~
CANCEL
Programming Reference Guide