Beep On Ascii Bel; Beep On Not On File - HP Linear Barcode Scanner II Programming Reference Manual

USB-COM (RS-232 Simulated) Interface

Beep on ASCII BEL

When this parameter is enabled, the reader issues a beep when a <BEL> char-
acter is detected on the RS-232 serial line. <BEL> is issued to gain a user's
attention to an illegal entry or other important event.
$CR2BB00
Beep On ASCII BEL = Disable

Beep on Not on File

This option enables/disables the action of the reader to sound a three beep
sequence upon receiving a Not-On-File (NOF) host command.
$CBPNF00
Beep On Not On File = Disable
DEFAULT
Programming Reference Guide


Enter/Exit Programming Mode
DEFAULT
$CR2BB01 
Beep On ASCII BEL = Enable

$CBPNF01
Beep On Not On File = Enable
15