Industrial 2 Of 5 Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Industrial 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
Control on page
Length Mode, or the second fixed length if in Fixed Length Mode. Length
includes the bar code's check, data, and full-ASCII shift characters.
The length can be set from 1 to 50 characters. The length includes check and
data characters. A setting of 00 specifies to ignore this length (only one fixed
length). See
instructions.
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
186
184. Length 2 is the maximum label length if in Variable
"Set Length 2"
$CU2L2
50 = Length 2 is 50 Characters
DEFAULT
on page 258 for more detailed programming
Industrial 2 of 5
Industrial 2 of 5 Length
~
CANCEL
Programming Reference Guide