Good Read Led Duration - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Good Read LED Duration

This feature specifies the amount of time that the good read LED remains on
following a good read. The good read LED on time can be set within a range of
0.1 to 25.5 seconds in 100ms increments. A setting of 00 keeps the LED on
until the next trigger pull. See
detailed programming instructions.
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
NOTE
58
$CLAGL
003 = Good Read LED stays on for
DEFAULT
0.3 seconds.
Indicators are dimmed during sleep.
"Good Read LED Duration"
LED and Beeper Indicators
on page 251 for more
~
CANCEL
Programming Reference Guide