Datalogic 2 Of 5 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Datalogic 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
Mode, or the first fixed length if in Fixed Length Mode. The length includes the
bar code's check and data characters.
The length can be set from 2 to 50 characters in increments of two. Length
includes the bar code's data characters. See
detailed programming instructions.
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
146. Length 1 is the minimum label length if in Variable Length
$CD2L1
06 = Length 1 is 6 Characters
DEFAULT
Enter/Exit Programming Mode
Datalogic 2 of 5 Length
"Set Length 1" on page 257 for
~
CANCEL
147