Standard 2 Of 5 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
on page 179
Mode. Length includes the bar code's check and data characters.
The length can be set from 1 to 50 characters. See
for more detailed programming instructions.
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
180
179. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CS2L1
08 = Length 1 is 8 Characters
DEFAULT
Standard 2 of 5
Standard 2 of 5 Length
Variable Length
Fixed Length on page 179
"Set Length 1" on page 257
~
CANCEL
Programming Reference Guide