Table of Contents
Advertisement
Programming
The reader is typically factory-configured with a set of default features stan-
dard to the interface type you ordered. After scanning the interface bar code
from the
ize your reader through use of the instructions and programming bar codes
available in the corresponding features section for your interface and also the
Data Format on page 35
Select the Interface Type
Upon completing the physical connection between the reader and its host, pro-
ceed directly to
interface type the reader is connected to and scan the appropriate bar code in
that section to select your system's correct interface type.
Configure Interface Settings
The reader is typically factory-configured with a set of default features stan-
dard to the interface type you ordered. If after scanning the interface bar code
from the
further customize your reader, turn to the appropriate section for your interface
type as listed below:
•
"USB-COM (RS-232 Simulated) Interface" on page 13
•
"Keyboard Interface," starting on page 23
•
"USB-OEM Interface," starting on page 33
Configure Other Features
If your installation requires different programming than the standard factory
default settings, the following sections of this guide allow configuration of
non-interface-specific settings you might require:
Reading Parameters
beeper and LED indicators and other universal settings.
Symbologies
These settings allow you to enable/disable symbologies, set label lengths,
require check digit, etc.
Software Version Transmission
The software version of the device can be transmitted over the USB-COM (RS-
232) and Keyboard interfaces by scanning the following label.
Programming Reference Guide
Interfaces on page 7
section, you can select other options and custom-
and
Symbologies on page 65
"Interfaces"
on page 7 for information and programming for the
Interfaces
section, your installation requires you to select options to
Includes general features such as programming for scanning,
:
Includes options concerning the bar code label types (symbologies).
:
Transmit Software Version
Programming
chapters of this guide.
5
Advertisement
Table of Contents
