Mitsubishi Electric AJ65VBTCU-68DAVN User Manual page 43

4 SETUP AND PREPARATION BEFORE OPERATION
CAUTION
(1) When using the DIN rail adapter, install the DIN rail by making sure of the
(2) As the CC-Link connector type metal installation fitting, use the narrow-width type
(3) Refer to the Master Module user's manual for the name, specification, and
4 - 2
When disposing of this product, treat it as industrial waste.
Use the programmable controller in an environment that meets the general
specifications in this manual.
Failure to do so may result in electric shock, fire, malfunction, or damage to or
deterioration of the product.
Securely fix the module with a DIN rail or mounting screws. Tighten the screws
within the specified torque range.
Undertightening can cause drop of the screw, short circuit or malfunction.
Overtightening can damage the screw and/or module, resulting in drop, short circuit,
or malfunction .
Shut off the external power supply for the system in all phases before mounting or
removing the module to or from the panel.
Failure to do so may cause the module to fail or malfunction.
Before handling the module, touch a grounded metal object to discharge the static
electricity from the human body.
Failure to do so may cause the module to fail or malfunction.
following:
(a) Applicable DIN rail models (conforming to the JIS C 2812)
TH35-7.5Fe
TH35-7.5Al
(b) DIN rail installation screw interval
When installing the DIN rail, tighten the screws with less than 200mm (7.87
inch) pitches.
(width 41)-dedicated fitting.
(a) CC-Link connector type metal installation fitting model
A6PLT-J65V1
manufacturers of supported cables for the use with AJ65VBTCU-68DAVN.
MELSEC-A
4
4 - 2