5 PROGRAMMING
5 - 8
[Usage in combination with other remote device stations]
(1) Depending on the remote device stations to be used, the program enclosed
by the dotted line 1) has two programming patterns as shown in the above
and the below figures. (To check which pattern can be used, refer to the
manual for the remote device to be used.)
[System configuration]
[Corrected program]
• RX(p+1)9 and RX(q+1)9 are initial data setting completion flags.
• RX(p+1)8 and RX(q+1)8 are initial data processing request flags.
MELSEC-A
5 - 8