Table of Contents
Advertisement
4 SETUP AND PREPARATION BEFORE OPERATION
(From the previous page)
[Correct example]
[Wrong example]
Latches
(Wiring completed)
4 - 20
8) Check the press-fit condition (viewing from the top).
Viewing from the top, check that there is no clearance between
the plug body and plug cover.
Note: Clearance may occur between the plug body and plug
Latch
Clearance
cover when the latches do not engage securely as shown
in [Wrong example].
Press the plug cover firmly with pliers until it looks like
[Correct example] condition illustrated on the left.
MELSEC-A
4 - 20
Advertisement
Table of Contents
Troubleshooting
