Program Example For Use Of The Acpu/Qcpu (A Mode) (Dedicated Instructions) - Mitsubishi Electric AJ65VBTCU-68DAVN User Manual

5 PROGRAMMING

5.2.4 Program Example for Use of the ACPU/QCPU (A mode) (dedicated instructions)

Setting of network parameters using RLPA dedicated instruction
Setting of automatic refresh parameters using RRPA dedicated instruction
5 - 12
A sequence program is used to set the network and automatic refresh parameters.
(1) Program example
MELSEC-A
Synchronization mode
invalid
Number of connected
modules:1
AJ65VBTCU-68DAVN
station information (remote
device station, 3 station
occupied, station No. 1)
Dedicated instruction
(RLPA)
Starting I/O number of
master module
Parameter storage starting
device
Device which turns on
1 scan at completion
Reads parameter status
at abnormal completion.
Sets RX starting number.
Sets "X".
Sets X400.
Sets 32 points.
Sets RY starting number.
Sets "Y".
Sets Y400.
Sets 32 points.
Sets RW starting number.
Sets "D".
Sets D200.
Sets 265 points
5 - 12