Enabling Or Disabling The Appliance Mode; Enabling The Appliance Mode - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
2.8

Enabling or Disabling the Appliance Mode

In the Appliance mode, the thin client directly starts up with the Microsoft remote desktop, Citrix ICA, VMware View, or
Horizon session launched. After exiting a session, the client will be turned off.

2.8.1 Enabling the Appliance Mode

To enable the Appliance mode, do the following:
1. On Atrust Client Setup, click System > Appliance Mode.
2. Click to check Enable Appliance Mode.
104
Note There are two modes for your thin client:
No. Mode
1 Appliance
2 Autostart
For more information on Autostart mode, see sections:
 Chapter 4, "5.5 Configuring Advanced RDP Connection Settings"
 Chapter 4, "5.8 Configuring Advanced ICA Connection Settings"
 Chapter 4, "5.11 Configuring Advanced View Connection Settings"
Note Ensure that you have configured the connection settings for the desired Microsoft Remote Desktop,
Citrix ICA, VMware View, or Horizon session under Applications tab. You need to specify which
service type and connection settings entry will be used under the Appliance mode. For detailed
instructions, see sections:
 Chapter 4, "5.3 Configuring Basic RDP Connection Settings"
 Chapter 4, "5.6 Configuring Basic ICA Connection Settings"
 Chapter 4, "5.9 Configuring Basic VMware Horizon Connection Settings"
Express5800/US320f User's Guide
Description
The client will automatically start up with the RDP / ICA / View session
launched and is shut down after the session ends.
The client will start up directly with the desired RDP / ICA / View session
and perform the configured action after exiting the session.
Available actions include:
 Returning to the local desktop
 Re-launching a new session
 Restarting the thin client
 Turning off the thin client
2. Configuring System Settings