Utilities Affected By Shutdown And Restart - NEC Express5800 Series User Manual

Chapter 5 Administrative Utilities and Settings
2.

Utilities Affected by Shutdown and Restart

The following utilities are affected by restarting and shutting down the thin client:

Unified Writer Filter overlay
To retain the setting changes after US320f is restarted, you need to disable the Unified Writer Filter. For details, see
Chapter 4, "2.9 Configuring UWF (Unified Write Filter)".
If UWF is not disabled, the new settings will be lost when the thin client is shut down or restarted. The Unified Writer
Filter overlay contents are not lost when you simply log off and on again as the same or a different user.
Writing the UWF overlay while UWF is enabled can be authorized by the administrator by executing a UWF command
line option or by specifying a setting in the Unified Writer Filter Control dialog box. For details, see Chapter 5, "3.
Using the Unified Write Filter (UWF)".

Power Management
A monitor saver turns off the video signal to the monitor, allowing the monitor to enter a power-saving mode after
a designated idle time. Power settings are available in Start > Control Panel > Power Options.

Wake-on-LAN
This standard Windows 10 IoT feature discovers all thin clients in your LAN, and enables you to wake them up by
clicking a button. This feature allows Atrust Device Manager, for example, to perform image updates and remote
administration functions on devices that have been shut down or are on standby. To use this feature, the thin client
power must remain on.
162
Express5800/US320f User's Guide
2. Utilities Affected by Shutdown and Restart