Chapter 4 Configuring Client Settings with Atrust Client Setup
5.3.3 Connection Type: Web Feed
To configure RDP connection settings for Web Feed connection type, do the following:
1. On Atrust Client Setup, click Applications > Remote Desktop.
2. The RDP Connection list appears in the Configuration area.
3. Click Add on the top of the RDP Connection list to create a new entry of RDP connection.
4. On General sub-tab, click the Connection Type drop-down menu to select Web Feed.
5. Type in the session name, the Web Feed URL through which remote applications is accessible, and your credentials
for Web Feed.
6. Click Update Now in the RemoteApp and Desktop Connections section. After completion, the result will be shown
as below in that section.
7. Click Save to add this RDP connection entry.
Note
Your US320f supports only RD Web Access based on Windows Server 2016 or Windows Server 2012
R2; Windows Server 2008 R2 based is not supported.
Note
If you have not created any entry, the RDP Connection list will be empty.
The red asterisks indicate the required fields.
Note
Consult your system administrator about the appropriate Web Feed URL.
Note
Depending on your plan of service delivery and the configuration of your server(s), you may need
to configure other advanced RDP connection settings for service access. For more information on
other available settings, see Chapter 4, "5.5 Configuring Advanced RDP Connection Settings".
Express5800/US320f User's Guide
5. Configuring Service Access Settings
123