Configuring Settings For Usb Storage Devices - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
3.3

Configuring Settings for USB Storage Devices

To configure settings for USB storage devices, do the following:
1. On Atrust Client Setup, click Devices > USB Storage.
2. Click the drop-down menu to select the desired setting. Three options are available: Enable USB Storage, Read-
Only Access, and Disable USB Storage.
3. Click Save to store your change.
114
By selecting Enable USB Storage, you can map a USB storage device in a remote / virtual desktop
Note
session. To map a USB storage device to a virtual desktop session, you must properly configure
optional settings for RDP / ICA connection entries on the Applications tab. For details, see each of
the following sections:
– Chapter 4, "5.5 Configuring Advanced RDP Connection Settings"
– Chapter 4, "5.8 Configuring Advanced ICA Connection Settings"
Important  Even after selecting 'Deactive USB Storage', connections to USB FDD, the USB DVD Multi-
Drive and the MTP Device will not become inactive
 Even if you select Disable USB Storage, the user can use a locally connected USB storage
device through redirection in a Citrix ICA and VMware View / Horizon session. To completely
prevent USB storage devices from being used in a virtual desktop session, setup in the Citrix
and VMware service delivery environment is required.
Express5800/US320f User's Guide
3. Configuring External Device Settings