Setting A Password To Access Atrust Client Setup - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
2.3

Setting a Password to Access Atrust Client Setup

You can set a password to access Atrust Client Setup.
To set a password to access Atrust Client Setup, do the following:
1. On Atrust Client Setup, click System > Password.
2. Check Security > Require a password to access Atrust Client Setup.
3. A window appears for you to set the password.
4. Enter an arbitrary password and click Save to apply it.
5. Click Save to save all the changes.
 Only the system administrator and manager are allowed to access Atrust Client Setup by
Note
default. So, if you do not set a password, system administrator privileges are sufficient to access
Atrust Client Setup. If you set a password, that password must be entered to launch Atrust
Client Setup.
 If a password to access Atrust Client Setup is set, the standard US320f user needs the following
two passwords to access Atrust Client Setup: the password for the administrator account in
Windows 10 IoT Enterprise LTSB and the password to access Atrust Client Setup.
Express5800/US320f User's Guide
2. Configuring System Settings
85