Notes And Restrictions - NEC Express5800 Series User Manual

Chapter 8 Software Information, Notes, and Restrictions
2.2

Notes and Restrictions


Failure of the software built into this product and related software published on the support page can no longer be
corrected after the relevant software developer discontinues support. In this case, only limited support such as
actions based on known cases is provided and you must basically operate the system by working around the failure
(the failure remains "as-is"). To avoid such a situation, promptly conduct verification in all the operation scenarios to
confirm that the product operates normally while building the system and after starting operation.

The thin client terminal equipped with Windows OS is putting into effect the basic security measure for restricting
part of operation to the User account in the factory shipment state, but it isn't guaranteed that there are no
problems for security. According to the practical environment and the security for the customer, it's necessary to
customize function restriction for User account and the blockade of the network port which isn't used, and so on.
After confirming the no problem thing sufficiently beforehand, please use it.

Like other IT systems, the thin client system might not operate correctly or it might not work sufficiently due to
factors such as network configuration, policy settings, and the specifications of the connected peripheral devices.
Some features require installation of third party software. NEC does not guarantee the use of this thin client in any
environment under any conditions. Before using the thin client, thoroughly evaluate the operation in the actual
operating environment and confirm that there is no problem.

Hotfixes of thin client are published by support page. It is recommended to configure ADM server for deploying the
Hotfixes to a thin client over the network and register the thin client as a management target of the ADM server. You
need install the Hotfixes to each thin client manually if ADM is not used.

OS to be equipped with this product is renewed for functional enhancement and quality improvement. Because of
the timing of OS renewal at the production plant, there is a possibility that old and new OS is mixed in the case of
additional purchase or two or more purchase. When needing unification of the OS version by the whole system,
please use system image delivery by ADM and USB flash memory.

If you copy a file whose size exceeds the pre-set maximum memory size (1024 MB by default) of UWF to C drive of
US320f while the UWF is enabled, US320f becomes extremely unstable.

ACS supports VMWare Horizon Client pre-installed on US320f. If you upgrade VMWare Horizon Client, connection
entries created by Atrust Client Setup may not work correctly.

When installing or uninstalling an application, you need to apply the shortcuts of the application displayed on Start
screen of the User account before enabling UWF (Unified Writer Filter). It takes some time (about 4 to 5 seconds)
before the shortcuts are displayed on the Start screen of a user account other than Administrator after sign-in. If you
enable UWF without applying the shortcuts when using a User account, the settings will be discarded every time the
system restarts and the shortcuts will take a long time to appear. (In the case of uninstallation, the deleted shortcuts
remain and take time to disappear.)
To permenantly apply the shortcuts on the Start screen, disable UWF first, and follow the steps below to install or
uninstall an application, and then enable UWF.
When installing an application
1. Sign in to US320f as an Administrator.
2. Install the application.
3. Sign out from the Administrator account.
4. Sign in as a User.
5. Wait until the shortcut of the installed application appears on the Start screen.
When uninstalling an application
1. Sign in to US320f as an Administrator.
2. Uninstall the application.
228
Express5800/US320f User's Guide
2. Notes and Restrictions