Installation, Relocation, Storage, And Connection - NEC Express5800 Series User Manual

Use the authorized power cord only.
Use only the power cord that comes with US320f. If an electric current exceeding the rated current flows, it could
cause a fire. Also, observe the following precautions to prevent electrical shock or fire caused by a damaged power
cord.
 Do not stretch the cord harness.
 Do not bend the power cord.
 Do not twist the power cord.
 Do not step on the power cord.
 Uncoil the power cord before use.
 Do not secure the power cord with staples or
equivalent objects.
Do not use the attached power cord for any other device or usage.
The power cord that comes with US320f is designed to connect with US320f and to be used with US320f, and its
safety has been tested. Do not use the attached power cord for any other purpose. Doing so may cause a fire or an
electric shock.

Installation, relocation, storage, and connection

Do not install US320f in other than the specified location.
Do not install US320f in the following places or any place other than one specified in this User's Guide. Failure to
follow this instruction may cause a fire.
 A dusty place
 A humid place such as near a boiler
 A place exposed to direct sunlight
 An unstable place
Do not use US320f in an environment where corrosive gases exist
Do not install US320f in a place subject to corrosive gases including sodium chloride, sulfur dioxide, hydrogen sulfide,
nitrogen dioxide, chlorine, ammonia, or ozone. Do not install US320f in an environment that contains dust, chemicals
that accelerate corrosion such as sodium chloride or sulfur, or conductive materials. Failure to follow this warning
may cause the wiring on the printed wiring board to short-circuit, leading to fire. If you have any questions, contact
the store where you purchased the product or your maintenance service company.
Express5800/US320f User's Guide
Precautions for Use (Be Sure to Read)
 Do not pinch the power cord.
 Keep chemicals away from the power cord.
 Do not place any object on the power cord.
 Do not alter, modify, or repair the power cord.
 Do not use a damaged power cord. (Replace the
damaged power cord with a power cord of the same
standard. For information about replacing the power
cord, contact the store where you purchased the
product or your maintenance service company.)
19