Siemens SIMATIC Ident Function Manual page 118

Appendix
A.1 Internal status parameter
Further status variables exist in the "IID_HW_CONNECT" variable.
Table A- 2
Name
STATUS_IN_WORK
STATUS_INITIALISATION
LAST_CMD_INIT
You will find the status variables on the following path: "IID_HW_CONNECT
variable/Static/*Name*".
118
Status variables in "IID_HW_CONNECT"
Data type
BOOL
BOOL
BOOL
Description
Command is currently being executed
• True = An instruction or the Ident pro-
file is accessing this channel/reader.
• False = The channel/reader is not
currently being used.
Reset display
• True = A reset is active on this read-
er/channel.
• False = No reset is active on this read-
er/channel.
This bit indicates that the last command
to be executed was a reset.
• True = Last command was reset
• False = Last command was not reset
This bit is reset at the next command start
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04