Overview Of The Add-On Instructions - Siemens SIMATIC Ident Function Manual

Configuring the instructions

4.2 Overview of the add-on instructions

4.2 Overview of the add-on instructions
To program the various identification systems, a library with add-on instructions is
available.
The following table provides an overview of the currently available add-on instructions.
Table 4- 1 Overview of the add-on instructions
Position
Add-On Ident
Instructions instruc-
tions
Ident profile
14
Symbolic name
Parameter Param_RF600
instructions
Param_RF18xC
Param_RFID181EIP
Basic in- Read
structions
Write
Read_MV
Set_MV_Program
Extended Config_Download
instructions
Config_Upload
Inventory
Read_EPC_Mem
Read_TID
Read_UID
Set_ANT_RF300
Set_Param
Write_EPC_ID
Write_EPC_Mem
AdvancedCMD
Status in- Reader_Status
structions
Tag_Status
RESET in- Reset_MV
structions
Reset_Reader
Reset_RF200
Reset_RF300
Reset_Univ
Ident_Profile
Description
You can use these instructions to transfer the
parameters required after a restart to the reader
or communication module.
Using this instruction, you can easily program
communication with the Ident systems.
The basic instructions include all the instructions
that are often used.
Using this instruction, you can easily program
communication with the Ident systems.
The extended instructions provide functions that
are required less often for operating the Ident
system.
Advanced command set. Using the "Ad-
vancedCmd" instruction, it is possible to access
other commands from the Ident command set
and to execute chained commands.
Using the status instructions, you obtain infor-
mation about the reader or transponder.
Using the reset instructions, you can initialize
Ident systems.
These instructions are available for experts to be
able to include complex command structures in
their own program sequence. It is also possible to
use command repetition and chaining.
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04