Preface - Siemens SIMATIC Ident Function Manual

Preface

Warranty and Liability
The application examples are not binding and do not claim to be complete regarding the
configuration and equipment and any eventuality. The application examples do not
represent customer-specific solutions. They are only intended to provide help for typical
applications. You are responsible for ensuring that the described products are used
correctly These application examples do not relieve you of the responsibility to use safe
practices in application, installation, operation and maintenance. When using these
application examples, you recognize that we cannot be made liable for any
damage/claims beyond the liability clause described. We reserve the right to make
changes to these application examples at any time without prior notice. If there are any
deviations between the recommendations provided in these application examples and
other Siemens publications – e.g. Catalogs – the contents of the other documents have
priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of the
examples, information, programs, engineering and performance data etc., described in
this application example shall be excluded. Such an exclusion shall not apply in the case
of mandatory liability, e.g. under the German Product Liability Act
("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life, body or
health, guarantee for the quality of a product, fraudulent concealment of a deficiency or
breach of a condition which goes to the root of the contract ("wesentliche
Vertragspflichten"). The damages for a breach of a substantial contractual obligation are,
however, limited to the foreseeable damage, typical for the type of contract, except in
the event of intent or gross negligence or injury to life, body or health. The above
provisions do not imply a change of the burden of proof to your detriment.
Any form of duplication or distribution of these application examples or excerpts hereof
is prohibited without the expressed consent of the Siemens AG.
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04
3