Configuring the instructions
4.6 Programming the Ident profile
4.6
Programming the Ident profile
4.6.1
Structure of the Ident profile
Note
Parallel operation using Ident instructions and Ident profile is not possible
Note that the CM or reader cannot be operated at the same time using the Ident
instructions and the Ident profile.
The instructions described in the section"Programming instructions (Page 29)" represent
a simplified interface of the Ident profile. If the functionality available with the
instructions is not adequate for your application, you can use the Ident profile as an
alternative. Using the Ident profile, you can set complex command structures and work
with command repetition. The following graphic shows the Ident profile including the
commands that can be implemented with it.
Note
Ident profile for trained users
The Ident profile is a complex instruction containing all the functionality of the Ident
instructions. The Ident profile was developed specially for trained users who want to
configure complex functions with a single instruction. For untrained users, we
recommend using the Ident instructions.
64
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04