List Of Error/Warning Codes - Panasonic FP7 Series User Manual

8.1 CPU Unit Specifications
Device
Name
No.
Operation history No.4 Number of
SD234
free buffers
Operating history No.5 Number of
SD235
free buffers
Operating history No.6 Number of
SD236
free buffers
Operating history No.7 Number of
SD237
free buffers
SD238
(Not used)
-SD239
Operation history No.0 Update
SD240
counter
Operation history No.1 Update
SD241
counter
Operation history No.2 Update
SD242
counter
Operation history No.3 Update
SD243
counter
Operation history No.4 Update
SD244
counter
Operation history No.5 Update
SD245
counter
Operation history No.6 Update
SD246
counter
Operation history No.7 Update
SD247
counter
SD248
(Not used)
-SD254

8.1.7 List of Error/Warning Codes

Error codes 1 to 6
Code Name
1 CPU hardware error 1
2 CPU hardware error 2
I/O bus power supply
error
3
(including "no end
cover")
Unit attachment limit
4
exceeded
5 Project data error
8-24
Description
Stores a value +1 for each operation history record
accumulated.
Operation
Stop
There may be a hardware problem. Please contact your
dealer.
Stop
Error in the I/O bus part is probable, such that the end unit
has not been attached. Double-check the attachment status
Stop
of units. This error also occurs when an expansion cable is
removed during operation.
is probable that the unit attachment limit has been exceeded.
Stop
Double-check the configuration.
Stop Turns on when there is an error in project data.
Error contents and steps to take
WUME-FP7CPUH-09