5.3 Backing Up the Project
5.3.1 Transmission from the Execution Memory RAM to the Backup Memory
ROM2
● In normal operation, you can save your project in the execution memory RAM/ROM1, and
use the saved data. In order to prepare for unplanned rewriting, backup memory ROM2 is
also installed.
● When the mode switch is set to PROG., you can back up the execution project that is saved
in RAM into ROM2.
■
Switch setting conditions
Mode switch
Card operation switch
1.
Set the mode switch to PROG.
2.
By executing Online>Project Backup using FPWIN GR7, the project is transmitted from
the execution memory RAM to the backup memory ROM2.
WUME-FP7CPUH-09
Switch
5.3 Backing Up the Project
Setting
PROG.
ROM
5-7