4.1 Installation
4.1.2 Attaching Units
● Attach unit attachment connectors on the side of each unit.
● Make sure to connect an end unit to the right of the end unit.
● After attaching units, attach the assembly to the DIN rail.
(Note 1)
When the CPU unit is CPS2R, a power supply unit cannot be attached.
Unit attaching procedure
1.
Release the fixing hook on the side of the unit.
When attaching a power supply unit, remove the connector cap.
2.
Attach unit connectors on the side of each unit.
4-4
WUME-FP7CPUH-09