Panasonic FP7 Series User Manual page 48

2.1 CPU Unit (CPS4R*/CPS3R*)
Numb
er
11-1 Battery holder
11-2 SD memory card slot
11-3 Card operation switch
11-4 Power supply connector
(Note 1) Do not apply an excessive force to the card cover when opening or closing it or when the cover is left
open. Otherwise, the cover attachment part will be deformed to cause malfunction in the cover
recognition switch mounted inside the product.
(12) Mode switch
Switch position
RUN (left)
PROG. (middle)
COPY (right, momentary)
(Note 1) Whether the switch is set to RUN or PROG., the mode can be switched through remote operation from
the tool software. When power is turned on again, it operates in the mode set on the switch.
(13) Fixing hook
Used for fixing a power supply unit to the CPU unit.
2-4
Name
Attach a battery.
Insert an SD memory card.
Select between ROM operation or SD operation. By selecting SD
operation, provisional operation from the SD memory card becomes
possible.
Connect to a power supply connector
Sets to RUN mode. The program is executed and operation begins.
Sets to PROG mode.
When the switch is set to COPY, a project stored in the internal RAM /
ROM1 is transmitted to ROM2 as a backup project.
Functions
Operation mode
WUME-FP7CPUH-09