Installation; Installation Environment And Space - Panasonic FP7 Series User Manual

4.1 Installation

4.1 Installation

4.1.1 Installation Environment and Space

■
Installation environment
Operating environment (Use the unit within the range of the general specifications when
installing)
● Ambient temperatures: 0 to +55°C
● Ambient humidity: 10 to 95% RH (at 25°C, no-condensing)
● Pollution degree: 2
● Altitude: Up to 2,000 m above sea level
● Overvoltage category: II or lower
● Installation location: Intended for use in a control panel with a protective construction of IP54
or higher
(made from metal of adequate strength).
Do not use the unit in the following environments.
● Areas exposed to direct sunlight
● Areas exposed to sudden temperature changes, causing condensation
● In the presence of inflammable or corrosive gas
● Areas with excessive airborne dust, metal particles or saline matter
● In the presence of benzine, paint thinner, alcohol and other organic solvents, or strong
alkaline solutions such as ammonia or caustic soda
● Areas exposed to direct vibrations, shock, or drops of water
● Around power transmission lines, high voltage equipment, power cables, power equipment,
radio transmitters, or any other equipment that would generate high switching surges (100
mm or more)
■
Clearance
● In order to secure clearance for ventilation, ensure that the top and the bottom of the unit are
at least 50 mm away from other devices, wiring ducts, etc.
4-2 WUME-FP7CPUH-09