Panasonic FP7 Series User Manual page 95
Cpu unit
Hide thumbs
Also See for FP7 Series:
- Command reference manual (1222 pages) ,
- User manual (275 pages) ,
- Additional functions manual (45 pages)
Table of Contents
Advertisement
■
When power is OFF
1. Attach an SD memory card that houses the auto execution file "autoexec.fp7" and the
comment file "comment.fp7" for a project to the CPU unit.
2. Close the cover and power on the unit.
3. Until "COPY LED" flashes (approx. 5 seconds), set the RUN/PROG./COPY switch to
"COPY".
Transmission of project data is started. Once "COPY LED" starts to flash, the transmission
process continues if you let go off the COPY switch. Once transmission is completed,
"COPY LED" turns off.
■
When power is ON
1. Change to the PROG. mode.
2. Attach an SD memory card that houses the auto execution file "autoexec.fp7" and the
comment file "comment.fp7" for the project to the CPU unit.
3. Close the cover.
4. Until "COPY LED" flashes (approx. 5 seconds), set the RUN/PROG./COPY switch to
"COPY".
Transmission of project data is started. Once "COPY LED" starts to flash, the transmission
process continues if you let go off the COPY switch. Once transmission is completed,
"COPY LED" turns off.
● Copying of a project triggered by the COPY switch does not depend on settings for the card
operation switch. Operation starts whether the switch is set to CARD or ROM.
WUME-FP7CPUH-09
5.4 SD Memory Card Operation
5-13
Advertisement
Table of Contents
