Connecting Interfaces For Communication With S7-1500R; Connecting The Profinet Ring To S7-1500 - Siemens SIMATIC S7-1500 System Manual

Wiring

7.8 Connecting interfaces for communication with S7-1500R

3. Connect the load current supply to the CPU.
Figure
NOTE
Connection on the underside of the device
The connection socket for the 4-pole connection plug is located on the underside of the
device:
– CPU 1513R-1 PN, as of article number 6ES7513-1RM03-0AB0
– CPU 1515R-2 PN, as of article number 6ES7515-2RN03-0AB0
Additional information can be found in the manuals for the CPUs.
7.8 Connecting interfaces for communication with S7-1500R
Connecting interfaces for communication
Connect the communication interfaces of the CPUs using standardized plug connectors.
Use prefabricated connecting cables for the connection. If you want to prepare
communication cables yourself, the interface assignment is specified in the CPU manuals.
Observe the mounting instructions for the connectors.
7.8.1

Connecting the PROFINET ring to S7-1500

Introduction
Use the RJ45 sockets of the PROFINET interfaces X1 P1R and X1 P2R to connect the PROFINET
ring between the two R-CPUs.
180
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD