Table of Contents
Advertisement
Technical Information
4.2
Service Programming
1. Turn on the appliance.
2. Touch the thermometer .
3. Touch the refrigerator icon
to access the freezer.
4. Note the position of the down arrow
is at the minimal setting, then this icon will not be lit. Touch the up arrow
to raise the temperature and to make the down arrow visible.)
5. Touch the thermometer to turn off the display.
6. Press and hold in the area of the down arrow
7. Touch the thermometer once.
8. Release the down arrow
time until P is displayed.
9. Scroll through, using the arrows, to the desired function (e.g., A). See
Table 030-19 for a list of functions. Touch the thermometer to access
the options for that function. For example, if A was selected, A – will be
displayed after the thermometer is touched.
10. Scroll through to the desired option. If an option is flashing, then it can be
selected. If it is lit steadily, then it has been programmed. See Table 030-
19 for a list of options for each function.
11. Touch the thermometer to save the option. It will now be steadily lit.
12. Scroll through to – (e.g., A –).
13. Touch the thermometer to exit to the list of functions. A (as an example)
will now be displayed. Scroll to other functions to make changes, or scroll
back to P and then touch the thermometer to quit.
14. To quit without saving any changes, close the appliance door or do not
touch any icons for 2 minutes.
Symbol
P
A
I-
r
, then touch it again 5 times; hold on the 5th
Service programming settings
Function
Options
Main menu
---
A0: Factory settings have not been
Restoring factory
changed
settings
A1: Settings have been changed
l-0: °F
Temperature format
l-1: °C
r0: Log off
r1: Log on
r2: Reset RemoteVision module
r3: Reset RemoteVision module and
RemoteVision module
restore factory settings
programming
r4: Ad-hoc mode; reset and start with
a standard IP address, settings
available through customer service
(RemoteVision modules only)
34
to access the refrigerator or the freezer icon
. (If the current temperature setting
.
KF 18xx/19xx
Factory setting
---
A0
°F (I-0)
---
Advertisement
Table of Contents
