Air Flap Control Check; Refrigerator Door Switch (S4/1) Removal; Figure 030-39: Cover Caps And Retaining Screws Of Air Flap Housing; Figure 030-40: Reed Switch Magnet - Miele KF 18 Vi Series Technical Information

KF 18xx/19xx
4.18

Air Flap Control Check

1. Unclip the cover caps. See Figure 030-39, Item 1.
2. Remove the retaining screws. See Figure 030-39, Item 2.
3. Take off the housing.
4. Activate the air flap in service mode and check positioning with a mirror.

Figure 030-39: Cover Caps and Retaining Screws of Air Flap Housing

4.19

Refrigerator Door Switch (S4/1) Removal

Note:
The magnet to activate the reed switch is located on the appliance door,
behind a cover. See Figure 030-40, Item 1.

Figure 030-40: Reed Switch Magnet

1. Disconnect the appliance from the power supply.
2. Lever off the cover with the lid opener. See Figure 030-41, Item 1.
3. Carefully remove the reed switch module. See Figure 030-41, Item 2.
51
Technical Information