Temperature Test; Removing The Refrigerator Evaporator Cover; Figure 030-17: Lamp Cover Removal - Miele KF 18 Vi Series Technical Information

Hide thumbs Also See for KF 18 Vi Series:

Table of Contents

Technical Information

4.5

Temperature Test

Refrigerator:

Have the customer place a glass of water in the appliance about 2 to 3 hours

before the technician arrives. The glass should be located in the center of the

cavity. Make sure that there is nothing around the glass of water so that the

airflow can bring the water to temperature properly. Stir the water, then place

a temperature probe into the glass of water and close the door of the

refrigerator.

Freezer:

Place a temperature probe in between frozen items inside the freezer and

close the door. Wait a few minutes for the temperature reading on the meter

to stabilize.

4.6

1. Disconnect the appliance from the power supply.

2. Remove the lamp covers in order to avoid scratching the refrigerator

interior. Press in the outer lamp covers on the left and right sides and

twist counterclockwise to remove. See Figure 030-17, Items 1 and 2.

3. Remove the glass plate from the insulation plate.

4. Take off the panel. See Figure 030-18, Item 1.

KF 18xx/19xx

Table of Contents

Kf 19 vi series Kf 18 sf series Kf 19 sf series