Table of Contents
Advertisement
KF 18xx/19xx
Symbol
b
n
h
H
Table 030-19: Service Programming Settings
4.3
Service Mode
1. Turn on the appliance.
2. Touch the thermometer .
3. Touch the refrigerator icon
to access the freezer.
4. Note the position of the down arrow
is at the minimal setting, then this icon will not be lit. Touch the up arrow
to raise the temperature and to make the down arrow visible.)
5. Touch the thermometer to turn off the display.
6. Press and hold in the area of the down arrow
7. Touch the thermometer once.
8. Release the down arrow
time until S is displayed.
9. Scroll through, using the arrows, to the desired function (e.g., F). See
Table 030-20 for a list of functions. Touch the thermometer to access
the options for that function. For example, if F was selected, F – will be
displayed after the thermometer is touched.
10. Scroll through to the desired option. If an option is flashing, then it can be
selected. If it is lit steadily, then it has been programmed. See Table 030-
20 for a list of options for each function.
11. Touch the thermometer to save the option. It will now be steadily lit.
12. Scroll through to – (e.g., F –).
13. Touch the thermometer to exit to the list of functions. F (as an example)
will now be displayed. Scroll to other functions to make changes, or scroll
back to S and then touch the thermometer to quit.
14. To quit without saving any changes, close the appliance door or do not
touch any icons for 2 minutes.
Service programming settings
Function
Options
b0: Button sound off
Button sounds on/off
b1: Button sound on
n0: Demo mode off
Demo mode on/off
n1: Demo mode on
h0: Filter is installed in appliance
h1: Filter is not installed
Filters
h2: Filter replacement confirmation.
Touch the thermometer to confirm.
H1: 32.9°F (0.5°C)
H2: 33.8°F (1.0°C)
SmartFresh
H3: 34.7°F (1.5°C)
temperature
H4: 35.6°F (2.0°C)
H5: 36.5°F (2.5°C)
, then touch it again 3 times; hold on the 3rd
35
to access the refrigerator or the freezer icon
. (If the current temperature setting
.
Technical Information
Factory setting
On (b1)
Off (n0)
---
34.7°F (H3)
Advertisement
Table of Contents
