Table 030-20: Service Functions - Miele KF 18 Vi Series Technical Information

Technical Information
Note:
The door and temperature alarms are suppressed during service mode.
Symbol
S
C
F
U
E
J1
J2
L

Table 030-20: Service Functions

1
A maximum of 10 faults can be saved.
Service functions
Function Options
Main menu ---
ID number of the 6-digit ID will display, 2 digits at a time. Example:
service electronics _C 00 20 82 corresponds to an ID number of 2082.
F0: No saved faults
Viewing/saving/
F1: At least one saved fault
deleting faults
F2: Delete all faults
U 01: Refrigerator compressor
U 02: Freezer compressor
U 03: Freezer defrost heater
U 04: Refrigerator defrost heater
U 05: Freezer drain heater
U 06: Refrigerator drain heater
U 07: Refrigerator interior heating
Component test
U 08: Condenser fan
U 09: Refrigerator evaporator fan
U 10: Freezer evaporator fan
U 11: Icemaker
U 12: Top air flap motor
U 13: Bottom air flap motor
U 14: Refrigerant stop valve
The cumulative running time that the appliance is connec-
Appliance run time ted to the power supply will be shown, 2 digits at a time.
Example: _E 07 20 82 = 72082 hours.
The test will run automatically.
Display test
all icons will alternate between yellow and red, then all
icons will be white. J – will appear when the test is done.
All icons are backlit.
Touch the icons one at a time. The icons will blink. When
the icons to the left of the temperature display are
Icon test
touched, no tone will sound. When the icons to the right of
the temperature display blink, a tone will sound.
If all icons are in order, J – will display.
1: Refrigerator air NTC
2: Refrigerator evaporator NTC
3: SmartFresh air NTC
4: Freezer air NTC
Sensor test
5: Freezer evaporator NTC
(only in software
versions 1794 and
6: Ambient-air NTC
later)
7: Microswitch for left air flap
8: Microswitch for right air flap
9: Air flap position switch
10: Freezer door switch
36
KF 18xx/19xx
1
will be displayed, then